WILLY ITALIANA

Label and tape solutions since 1975

Cut and fold

OMNILABEL LOGIC 2.0

Automatic machine for cutting and folding woven or printed ribbons and labels, equipped with ribbon feeding by means of a step motor controlled by a “Hi-Tech” photocell (standard), with the help of our folding groups recognised worldwide as being machines of excellence, makes it possible to obtain perfectly cut and folded labels.
The electronic feeding system makes it possible to cut extremely long labels, up to 10 meters. Equipped with touch screen to set the parameters of the machine settings and view working data using simple intuitive symbols. IMAGE TARGETING (tolerance 0,5 mm) – in the presence of an irregular ribbon with long and short labels, the OMNILABEL LOGIC 2.0 machine always centres the image of the label between the folds.

OMNILABEL LOGIC 2.0

FEEDING SYSTEMS

“HI-TECH”
PHOTOCELL FEEDING
(STANDARD)

This particularly sensitive photocell can read tone on tone colours (“FKB” includes electronic photocell feeding)

KIT 6 mm WITH “HI-TECH“ PHOTOCELL
(STANDARD)

Kit to cut ribbons with a minimum width of 6 mm, including a “HI-TECH” photocell to read tone on tone colours, guides and mechanical adaptations (“FB 6mm” includes electronic photocell feeding)

PHOTOCELL FOR STICKER DETECTION
(OPTIONAL)

Detection photocell for reflective silver stickers indicating defective labels

After-cut waste system for defective labels marked with a shiny sticker
(“CW” for “C”)
(OPTIONAL)
RIBBON END SENSOR
(STANDARD)

Sensor that detects the end of the ribbon and automatically stops the machine

(OPTIONAL)

System to automatically reject by means of a slide with trap door the cut & folded defective labels marked with a shiny sticker (not stacked)

CUTTING SYSTEMS

FUSION CUTTING (STANDARD) – The fusion cutting system supplied can process ribbons up to 75 mm wide and ensures perfect welding of the edges which are resistant to tough wash cycles. Special management of the blade avoid the ribbon being damaged by the heat of the blade. The temperature is electronically controlled to remain constant during processing. Robust design and the use of top grade steel guarantee the operator can work with satisfaction, preventing costly downtime.

FUSION CUTTING 100 mm WIDTH (STANDARD)

The specially modified guide when used together with the standard blade can carry out the single cut of ribbons up to 100 mm wide
.

FUSION CUTTING 115 mm WIDTH (OPTIONAL)

This specially designed fusion cutting unit complete with a functional and customised guide can carry out the single cut of ribbons up to 115 mm wide

SCISSOR CUTTING (OPTIONAL)

Designed for cutting ribbons up to 75 mm in width produced with any type of yarn even mixed cotton or Rayon. The temperature is adjustable and controlled electronically to remain constant during processing

SCISSOR CUTTING 45°(OPTIONAL)

This specially modified version of the K – Scissor cutting option makes a 45º angle cut on ribbons
.
.
.

ULTRASONIC CUTTING
(OPTIONAL)

Ideal for cutting polyester and acetate, leaving the cut edge extremely soft to the touch. Two different ultrasonic cutting systems are available as options, one cuts up to 50 mm (U50) and the other up to 75 mm (U75), sealing the edges while cutting

ACCESSORIES

LAMINATING UNIT AND REWINDER
FOR SELF-ADHESIVE KISS CUT (OPTIONAL)

Lorem ipsum dolor sit amet, consectetur adipiscing 

STACKER FOR CUT
ONLY LABELS (OPTIONAL)
.

Maximum ribbon width 100 mm if the FC100 option is present.

REWINDER FOR
SELF-ADHESIVE KISS CUT (OPTIONAL)

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
.
.
.
.
.

VIDEOCAMERA “OMNICAMERA” (OPTIONAL)

Accessory for quality control of ribbons complete with video camera and software, for the recognition and automatic rejection of defective labels during ribbon processing.
.
.
.

RIBBON IRONING UNIT (OPTIONAL)

It is ideal to improve the quality of the ribbons, particularly when they are not ironed during the processing. Our ribbon ironing unit increases the productivity of cut and fold machines, facilitating the ribbon processing and reducing the waste. This accessory is easily installed and it is applied to the rewinder at machine’s in-feed.

OMNILABEL LOGIC 2.0

FOLDING UNITS

«M»
OMNI FOLD UNIT
8-75 mm
Click here
«M100»
FOLD UNIT
8-100 mm WIDE VERSION
Click here
«MT»
MULTI FOLD UNIT
8-75 MM
Click here
«E»
END
FOLD UNIT
Click here
«C»
CENTRE
FOLD UNIT 
.
Click here
«EC»
BOOK COVER
FOLD UNIT 
.
Click here
«TN»
MITRE FOLD UNIT WITH THE OPTIONAL STACKER TS
Click here
«I»
LONGITUDINAL
FOLDER 
.
Click here