Slitting cutting machine
Machine for ultrasonic cutting and sealing of ribbons and tapes. Exit of the cut ribbons at the REAR SIDE of the machine.
Maximum ribbon width at in feed: 300 mm
Minimum width of cut ribbonsi: 10 mm
Speed: up to 60m/min
Frequency of ultrasonic unit: 30 Khz>
Number of ultrasonic units: 2 x 150 mm independent
Device for centering and automatic alignment of the ribbon at in feed controlled by a photocell, which reads the edge of the ribbon at in-feed in order to allow precise centering of the cut in case of irregular material.
The machine is equipped with two independent groups for ultrasonic cutting and constant cooling of vibrating parts by compressed air.
One motorised shaft for rewinding ribbon rolls with pneumatic expanders.
Emergency blocking system if ribbon cut is not carried out correctly.
The machine is equipped with a ribbon-roll shaft with a pneumatic brake and expanders that allow the blocking of the ribbon-roll during processing and the quick loading of ribbon rolls.
The machine is equipped with 10 circular blades and 10 blade holders easily interchangeable.
Control panel in order to check and manage the functions of the machine.
Protections to CE norms.
Heated calender for ironing the ribbons on exit.
7 MM CUT
Possibility to install on the machine further blades and blade holders to cut ribbons of 7 mm width.
V_Portable ultrasonic-sealing unit
this accessory joins the end of one ribbon to the start of another giving extremely resistant joins.
|MAX. SPEED:||60 m/min|
|RIBBON MAX WIDTH:||300 mmm|
|ELECTRICS:||400 V 3~ 50/60 Hz|
|MAX ABSORBED POWER:||3 kW|
|NOISE LEVEL:||< 70 dB|
|DIMENSIONS:||140 x 130 x 220 h cm|