Showroom


  • Omnilabel Basic

    Omnilabel Basic

    Omnicamera VIDEO CAMERA “OMNICAMERA”
    Accessory for quality control of ribbons complete with video camera and software, for the recognition and automatic rejection of defective labels during ribbon processing.
    Prestiro P- Ribbon ironing unit
    Ideal for giving a high quality finish to ribbons, even when the ribbons have not been ironed during the weaving process. This increases productivity thanks to the reduction of waste. The ironing plate has an adjustable temperature and automatically moves away from the ribbon when the machine stops. The running speed of the ribbon through the ironing unit is adjustable and constant with the speed of the machine to obtain the best possible result.
    M OMNI FOLD UNIT 8-75MM
    This multifunctional folding unit gives 8 types of labels all from one single unit, processing ribbons varying in width from 8 to 75 mm. The change from one fold to another takes less than two minutes.
    MS MS
    Stacker for Omni Fold Unit M for boxing labels starting from 10 mm in width.
    M100 OMNI FOLD UNIT 8-100MM WIDE VERSION
    This multifunctional folding unit in a wide version gives 8 types of labels all from one single unit, processing ribbons varying in width from 8 to 100 mm. The change from one fold to another takes less than two minutes. Supplied with a downward slide to stack up labels starting from 10 mm in width.
    E E
    End fold unit
    E3 20mm E3 20 mm
    Narrow end fold block
    E3 16mm E3 16 mm
    “MINI” Narrow end fold block
    E1 E1 – ADDITIONAL ACCESSORIES FOR E + E3
    Tag fold accessory
    C C
    Centre fold + book fold unit. Stacking from 10mm ribbon width.
    C3 C3
    Narrow centre fold + narrow book fold unit. Stacking from 10mm ribbon width.
    C1 C1 – ADDITIONAL ACCESSORY FOR C + C3
    Welding unit for Centre fold Unit. Stacking from 10mm ribbon width.
    EC EC
    BOOK COVER FOLD UNIT: Book cover + Manhattan fold open + Manhattan fold closed + Leaflet fold + Tag fold
    T T
    MITRE FOLD UNIT.
    TS TS
    Stacking unit for T Mitre fold block.
    S S
    STACKER FOR CUT ONLY LABELS. Maximum ribbon width 100 mm if the FC100 option is present
    ARB ARB
    LAMINATING UNIT AND REWINDER FOR SELF-ADHESIVE KISS CUT
    I I
    LONGITUDINAL FOLDER: Longitudinal end fold and cut + Longitudinal centre fold and cut “Pocket Label” + Longitudinal Manhattan fold and cut
    I+E I+E
    “WILLY” 4 SIDED FOLD
    FC100 FC100 – FUSION CUTTING 100 mm WIDTH
    The specially modified guide when used together with the standard blade can carry out the single cut of ribbons up to 100 mm wide.
    FC115 FC115 – FUSION CUTTING 115 mm WIDTH
    This specially designed fusion cutting unit complete with a functional and customised guide can carry out the single cut of ribbons up to 115 mm wide.
    K K – SCISSOR CUTTING
    Designed for cutting ribbons up to 75 mm in width produced with any type of yarn even mixed cotton or Rayon. The temperature is adjustable and controlled electronically to remain constant during processing.
    K45° K45° – SCISSOR CUTTING 45°
    This specially modified version of the K – Scissor cutting option makes a 45º angle cut on ribbons.
    U50 U75 U50 / U75 – ULTRASONIC CUTTING
    Ideal for cutting polyester and acetate, leaving the cut edge extremely soft to the touch. Two different ultrasonic cutting systems are available as options, one cuts up to 50 mm (U50) and the other up to 75 mm (U75), sealing the edges while cutting.
    F F – ELECTRONIC PHOTOCELL FEEDING
    An electromagnetic feeding element controlled by a photocell automatically brings the ribbon under the knife; ideal for woven ribbons without a feeding stitch and for printed ribbons.
    FN FN – RIBBON END SENSOR
    Sensor that detects the end of the ribbon and automatically stops the machine.
    FKB FKB – “HI-TECH” PHOTOCELL FEEDING
    This particularly sensitive photocell can read tone on tone colours.
    FB 6mm FB 6mm – 6 mm KIT WITH “HI-TECH “PHOTOCELL
    Kit to cut ribbons with a minimum width of 6 mm, including a “HI-TECH” photocell to read tone on tone colours, guides and mechanical adaptations.
    Joinlabel Joinlabel – 2 Ribbons
    Automatic devices to automatically join ribbons and to automatically substitute the rolls of empty ribbons reducing costly stoppages of machinery. Ideal to work in line using the automatic packing NONSTOPLABEL modular solution to increase production in label finishing.
    Joinlabel Advanced Joinlabel Advanced – 6 Ribbons
    Automatic devices to automatically join ribbons and to automatically substitute the rolls of empty ribbons reducing costly stoppages of machinery. Ideal to work in line using the automatic packing NONSTOPLABEL modular solution to increase production in label finishing.

    Go to the Machine’s Page »

  • Omnilabel Electronic

    Omnilabel Electronic

    Omnicamera VIDEO CAMERA “OMNICAMERA”
    Accessory for quality control of ribbons complete with video camera and software, for the recognition and automatic rejection of defective labels during ribbon processing.
    Prestiro P- Ribbon ironing unit
    Ideal for giving a high quality finish to ribbons, even when the ribbons have not been ironed during the weaving process. This increases productivity thanks to the reduction of waste. The ironing plate has an adjustable temperature and automatically moves away from the ribbon when the machine stops. The running speed of the ribbon through the ironing unit is adjustable and constant with the speed of the machine to obtain the best possible result.
    M OMNI FOLD UNIT 8-75MM
    This multifunctional folding unit gives 8 types of labels all from one single unit, processing ribbons varying in width from 8 to 75 mm. The change from one fold to another takes less than two minutes.
    MS MS
    Stacker for Omni Fold Unit M for boxing labels starting from 10 mm in width.
    M100 OMNI FOLD UNIT 8-100MM WIDE VERSION
    This multifunctional folding unit in a wide version gives 8 types of labels all from one single unit, processing ribbons varying in width from 8 to 100 mm. The change from one fold to another takes less than two minutes. Supplied with a downward slide to stack up labels starting from 10 mm in width.
    E E
    End fold unit
    E3 20mm E3 20 mm
    Narrow end fold block
    E3 16mm E3 16 mm
    “MINI” Narrow end fold block
    E1 E1 – ADDITIONAL ACCESSORIES FOR E + E3
    Tag fold accessory
    C C
    Centre fold + book fold unit. Stacking from 10mm ribbon width.
    C3 C3
    Narrow centre fold + narrow book fold unit. Stacking from 10mm ribbon width.
    C1 C1 – ADDITIONAL ACCESSORY FOR C + C3
    Welding unit for Centre fold Unit. Stacking from 10mm ribbon width.
    EC EC
    BOOK COVER FOLD UNIT: Book cover + Manhattan fold open + Manhattan fold closed + Leaflet fold + Tag fold
    T T
    MITRE FOLD UNIT.
    TS TS
    Stacking unit for T Mitre fold block.
    S S
    STACKER FOR CUT ONLY LABELS. Maximum ribbon width 100 mm if the FC100 option is present
    ARB ARB
    LAMINATING UNIT AND REWINDER FOR SELF-ADHESIVE KISS CUT
    I I
    LONGITUDINAL FOLDER: Longitudinal end fold and cut + Longitudinal centre fold and cut “Pocket Label” + Longitudinal Manhattan fold and cut
    I+E I+E
    “WILLY” 4 SIDED FOLD
    FC100 FC100 – FUSION CUTTING 100 mm WIDTH
    The specially modified guide when used together with the standard blade can carry out the single cut of ribbons up to 100 mm wide.
    FC115 FC115 – FUSION CUTTING 115 mm WIDTH
    This specially designed fusion cutting unit complete with a functional and customised guide can carry out the single cut of ribbons up to 115 mm wide.
    K K – SCISSOR CUTTING
    Designed for cutting ribbons up to 75 mm in width produced with any type of yarn even mixed cotton or Rayon. The temperature is adjustable and controlled electronically to remain constant during processing.
    K45° K45° – SCISSOR CUTTING 45°
    This specially modified version of the K – Scissor cutting option makes a 45º angle cut on ribbons.
    U50 U75 U50 / U75 – ULTRASONIC CUTTING
    Ideal for cutting polyester and acetate, leaving the cut edge extremely soft to the touch. Two different ultrasonic cutting systems are available as options, one cuts up to 50 mm (U50) and the other up to 75 mm (U75), sealing the edges while cutting.
    FK FK – “HI-TECH” PHOTOCELL FEEDING
    This particularly sensitive photocell can read tone on tone colours.
    F 6mm F 6mm – 6 mm KIT WITH “HI-TECH “PHOTOCELL
    Kit to cut ribbons with a minimum width of 6 mm, including a “HI-TECH” photocell to read tone on tone colours, guides and mechanical adaptations.
    Joinlabel Joinlabel – 2 Ribbons
    Automatic devices to automatically join ribbons and to automatically substitute the rolls of empty ribbons reducing costly stoppages of machinery. Ideal to work in line using the automatic packing NONSTOPLABEL modular solution to increase production in label finishing.
    Joinlabel Advanced Joinlabel Advanced – 6 Ribbons
    Automatic devices to automatically join ribbons and to automatically substitute the rolls of empty ribbons reducing costly stoppages of machinery. Ideal to work in line using the automatic packing NONSTOPLABEL modular solution to increase production in label finishing.
    Nonstoplabel N – NONSTOPLABEL Packs processed labels into boxes or bags
    This machine packs processed labels into boxes or bags. When the preset number is reached the container is automatically changed without having to stop the machine, with the possibility of excluding the premarked defective labels. Optimum to considerably increase the daily production of cutting and folding machines, which never need to be stopped for the changing of the box.
    Nonstoplabel NT – NONSTOPLABEL Double automatic mitre fold stacking and packing
    Automatically packs the mitre folded labels, stacking them vertically one on top of the other down in a downwards direction. It considerably increases the daily production of cutting and folding machines, which never need to be stopped for the changing of the box. When the pre-set number is reached the container is automatically changed.

    Go to the Machine’s Page »

  • Omnilabel Logic 2.0

    Omnilabel Logic 2.0

    Omnicamera VIDEO CAMERA “OMNICAMERA”
    Accessory for quality control of ribbons complete with video camera and software, for the recognition and automatic rejection of defective labels during ribbon processing.
    Prestiro P- Ribbon ironing unit
    Ideal for giving a high quality finish to ribbons, even when the ribbons have not been ironed during the weaving process. This increases productivity thanks to the reduction of waste. The ironing plate has an adjustable temperature and automatically moves away from the ribbon when the machine stops. The running speed of the ribbon through the ironing unit is adjustable and constant with the speed of the machine to obtain the best possible result.
    M OMNI FOLD UNIT 8-75MM
    This multifunctional folding unit gives 8 types of labels all from one single unit,
    processing ribbons varying in width from 8 to 75 mm. The change from one fold to
    another takes less than two minutes.
    MS MS
    Stacker for Omni Fold Unit M for boxing labels starting from 10 mm in width.
    M100 OMNI FOLD UNIT 8-100MM WIDE VERSION
    This multifunctional folding unit in a wide version gives 8 types of labels all from one single unit, processing ribbons varying in width from 8 to 100 mm. The change from one fold to another takes less than two minutes. Supplied with a downward slide to stack up labels starting from 10 mm in width.
    E E
    End fold unit
    E3 20mm E3 20 mm
    Narrow end fold block
    E3 16mm E3 16 mm
    “MINI” Narrow end fold block
    E1 E1 – ADDITIONAL ACCESSORIES FOR E + E3
    Tag fold accessory
    C C
    Centre fold + book fold unit. Stacking from 10mm ribbon width.
    C3 C3
    Narrow centre fold + narrow book fold unit. Stacking from 10mm ribbon width.
    C1 C1 – ADDITIONAL ACCESSORY FOR C + C3
    Welding unit for Centre fold Unit. Stacking from 10mm ribbon width.
    C120 C120 – ADDITIONAL ACCESSORY FOR C + C3
    Long Centre fold unit
    EC EC
    BOOK COVER FOLD UNIT: Book cover + Manhattan fold open + Manhattan fold closed + Leaflet fold + Tag fold
    T T
    MITRE FOLD UNIT.
    TS TS
    Stacking unit for T Mitre fold block.
    S S
    STACKER FOR CUT ONLY LABELS. Maximum ribbon width 100 mm if the FC100 option is present
    ARB ARB
    LAMINATING UNIT AND REWINDER FOR SELF-ADHESIVE KISS CUT
    I I
    LONGITUDINAL FOLDER: Longitudinal end fold and cut + Longitudinal centre fold and cut “Pocket Label” + Longitudinal Manhattan fold and cut
    I+E I+E
    “WILLY” 4 SIDED FOLD
    FC100 FC100 – FUSION CUTTING 100 mm WIDTH
    The specially modified guide when used together with the standard blade can carry out the single cut of ribbons up to 100 mm wide.
    FC115 FC115 – FUSION CUTTING 115 mm WIDTH
    This specially designed fusion cutting unit complete with a functional and customised guide can carry out the single cut of ribbons up to 115 mm wide.
    K K – SCISSOR CUTTING
    Designed for cutting ribbons up to 75 mm in width produced with any type of yarn even mixed cotton or Rayon. The temperature is adjustable and controlled electronically to remain constant during processing.
    K45° K45° – SCISSOR CUTTING 45°
    This specially modified version of the K – Scissor cutting option makes a 45º angle cut on ribbons.
    U50 U75 U50 / U75 – ULTRASONIC CUTTING
    Ideal for cutting polyester and acetate, leaving the cut edge extremely soft to the touch. Two different ultrasonic cutting systems are available as options, one cuts up to 50 mm (U50) and the other up to 75 mm (U75), sealing the edges while cutting.
    Joinlabel Joinlabel – 2 Ribbons
    Automatic devices to automatically join ribbons and to automatically substitute the rolls of empty ribbons reducing costly stoppages of machinery. Ideal to work in line using the automatic packing NONSTOPLABEL modular solution to increase production in label finishing.
    Joinlabel Advanced Joinlabel Advanced – 6 Ribbons
    Automatic devices to automatically join ribbons and to automatically substitute the rolls of empty ribbons reducing costly stoppages of machinery. Ideal to work in line using the automatic packing NONSTOPLABEL modular solution to increase production in label finishing.
    Nonstoplabel N – NONSTOPLABEL Packs processed labels into boxes or bags
    This machine packs processed labels into boxes or bags. When the preset number is reached the container is automatically changed without having to stop the machine, with the possibility of excluding the premarked defective labels. Optimum to considerably increase the daily production of cutting and folding machines, which never need to be stopped for the changing of the box.
    Nonstoplabel NE, NC – NONSTOPLABEL Automatic end or centre fold stacking and packing
    Automatically packs the end or centre cut and folded labels, stacking them vertically one on top of the other down into a box. When the preset number is reached the container is automatically changed without having to stop the machine, with the possibility of excluding the pre-marked defective labels. Optimum to considerably increase the daily production of cutting and folding machines, which never need to be stopped for the changing of the box.
    Nonstoplabel NT – NONSTOPLABEL Double automatic mitre fold stacking and packing
    Automatically packs the mitre folded labels, stacking them vertically one on top of the other down in a downwards direction. It considerably increases the daily production of cutting and folding machines, which never need to be stopped for the changing of the box. When the pre-set number is reached the container is automatically changed./td>

    Go to the Machine’s Page »

  • Galvolabel

    Galvolabel

    logo telecamera5 Hi-Tech video camera “LGC LABEL GENIUS CAMERA”
    The innovative video camera “LABEL GENIUS CAMERA” reads the contour to be cut following any deformation of the ribbon fabric, also in the presence of irregular label length, furthermore it can automatically create the cutting shape to be followed. The high speed of production remains unchanged compared to the standard GALVOLABEL machine. Our innovative system optimises production while avoiding costly waste of labels. The remarkable precision of the system makes it possible to carry out cutting processes which are normally impossible. The workable dimensions of the software are 110 x 110 mm. For optimal use of the camera the “L1 optional accessory Metal Conveyor Belt” is necessary on the GALVOLABEL machine. It keeps the ribbon supported during processing.
    L2 SM – Multi-cycle software
    Makes it possible to work sequences of drawings that are even different from each other in order to cut long labels.
    AL AL – Laminating unit and waste rewinder self-adhesive material
    Thanks to this option the machine can laminate ribbons with self-adhesive material completely automatically. It cuts the ribbon and the adhesive and rewinds the processed material. The waste material is automatically collected on the ribbon-rollholder installed at the out feed of the ribbon (waste rewinder). At this point the labels can be easily removed from the roll before being applied.
    LR LR – Waste rewinder
    Ideal to automatically separate the waste of the kiss-cut process from the material to be used. The labels rolled on the rewinder are ready to be used making further processes easier.
    L1 L1 – Track
    Removable accessory ideal to process large labels. It provides increased support in order to keep large labels and long ribbons in place, making their processing simpler and easier.
    L2 L2 – Removable drawer
    Ideal for processing single leather or imitation leather pieces and samples of woven labels. EASY TO USE – Thanks to its hand wheel, the operator can change the height of the working area according to the thickness of the product, in order to obtain the best quality cut.

    Go to the Machine’s Page »

  • Galvolabel XL

    Galvolabel XL

    logo telecamera5 Hi-Tech video camera “LGC LABEL GENIUS CAMERA”
    The innovative video camera “LABEL GENIUS CAMERA” reads the contour to be cut following any deformation of the ribbon fabric, also in the presence of irregular label length, furthermore it can automatically create the cutting shape to be followed. The high speed of production remains unchanged compared to the standard GALVOLABEL XL machine. Our innovative system optimises production while avoiding costly waste of labels. The remarkable precision of the system makes it possible to carry out cutting processes which are normally impossible. The workable dimensions of the software are 200 x 200 mm. For optimal use of the camera the “L1XL optional accessory Metal Conveyor Belt” is necessary on the GALVOLABEL XL machine. It keeps the ribbon supported during processing.
    L2 SM – Multi-cycle software
    Makes it possible to work sequences of drawings that are even different from each other in order to cut long labels.
    AL ALXL – Laminating unit and waste rewinder self-adhesive material
    Permette l’accoppiamento del nastro con materiale autoadesivo prima del taglio e del mezzo taglio (kiss-cut) e successivo riavvolgimento del materiale di scarto (sfrido) su un ribobinatore aggiuntivo. Disponibile optional LRXL solo per riavvolgere sfrido.
    LR LRXL – Waste rewinder
    Ideal to automatically separate the waste of the kiss-cut process from the material to be used. The labels rolled on the rewinder are ready to be used making further processes easier.
    L1 L1XL – Track
    Removable accessory ideal to process large labels. It provides increased support in order to keep large labels and long ribbons in place, making their processing simpler and easier.
    L2 L2XL – Removable drawer
    Ideal for processing single leather or imitation leather pieces and samples of woven labels. EASY TO USE – Thanks to its hand wheel, the operator can change the height of the working area according to the thickness of the product, in order to obtain the best quality cut.

    Go to the Machine’s Page »

  • Laserlabel XL 2.0

    Laserlabel XL 2.0

    logo telecamera5 Hi-Tech video camera “LGC LABEL GENIUS CAMERA”
    The innovative video camera “LABEL GENIUS CAMERA” reads the contour to be cut following any deformation of the ribbon fabric, also in the presence of irregular label length, furthermore it can automatically create the cutting shape to be followed. The high speed of production remains unchanged compared to the standard LASERLABEL XL 2.0 machine. Our innovative system optimises production while avoiding costly waste of labels. The remarkable precision of the system makes it possible to carry out cutting processes which are normally impossible. The workable dimensions of the software are 110 x 110 mm. For optimal use of the camera the “L1 optional accessory Metal Conveyor Belt” is necessary on the LASERLABEL XL 2.0 machine. It keeps the ribbon supported during processing.
    L2 SM – Multi-cycle software
    Makes it possible to work sequences of drawings that are even different from each other in order to cut long labels.
    AL AL – Laminating unit and waste rewinder self-adhesive material
    Thanks to this option the machine can laminate ribbons with self-adhesive material completely automatically. It cuts the ribbon and the adhesive and rewinds the processed material. The waste material is automatically collected on the ribbon-rollholder installed at the out feed of the ribbon (waste rewinder). At this point the labels can be easily removed from the roll before being applied.
    LR LR – Waste rewinder
    Ideal to automatically separate the waste of the kiss-cut process from the material to be used. The labels rolled on the rewinder are ready to be used making further processes easier.
    L1 L1 – Track
    Removable accessory ideal to process large labels. It provides increased support in order to keep large labels and long ribbons in place, making their processing simpler and easier.
    L2 L2 – Removable drawer
    Ideal for processing single leather or imitation leather pieces and samples of woven
    labels. EASY TO USE – Thanks to its hand wheel, the operator can change the height of the working area according to the thickness of the product, in order to obtain the best quality cut.

    Go to the Machine’s Page »

  • Presslabel

    Presslabel

    PT PT – Option for transfer printing
    protection-paper roll holder and waste-paper rewinder is ideal for protecting the belt of the ironing surface from ink stains during transfer printing.
    optional Presslabel IP
    Longitudinal folding device for end fold, centre fold and Manhattan fold, workable dimensions.
    optional Presslabel V – Portable ultrasonic welder
    The portable ultrasonic welder makes it possible to obtain very strong splicing between the end of one ribbon and the beginning of another.

    Go to the Machine’s Page »

  • Bestlabel

    Bestlabel

    optional Bestlabel V – Portable ultrasonic welder
    The portable ultrasonic welder makes it possible to obtain very strong splicing between the end of one ribbon and the beginning of another.

    Go to the Machine’s Page »

  • Slitlabel

    Slitlabel

    optional Slitlabel BC7 – 7 mm cut
    Possibility to install on the machine further blades and blade holders to cut ribbons of 7 mm width.
    optional Slitlabel BP – Heated calender
    Heated calender for ironing the ribbons on exit.
    optional Slitlabel BS – Electro-pneumatic device to expel waste ribbon
    Possibility to install on the machine an electro-pneumatic device to expel waste ribbon.
    optional Bestlabel V – Portable ultrasonic welder
    The portable ultrasonic welder makes it possible to obtain very strong splicing between the end of one ribbon and the beginning of another.

    Go to the Machine’s Page »

  • Slitlabel 2.0

    Slitlabel 2.0

    optional Slitlabel BC7 – 7 mm cut
    Possibility to install on the machine further blades and blade holders to cut ribbons of 7 mm width.
    optional Slitlabel Slitcamera
    Possibility to install a videocamera on the machine to centre the cuts.
    optional Bestlabel V – Portable ultrasonic welder
    The portable ultrasonic welder makes it possible to obtain very strong splicing between the end of one ribbon and the beginning of another.

    Go to the Machine’s Page »

  • Rollabel

    Rollabel

    optional Presslabel V- Portable ultrasonic welder
    The portable ultrasonic welder makes it possible to obtain very strong splicing between the end of one ribbon and the beginning of another.

    Go to the Machine’s Page »

  • Padlabel

    Padlabel

    optional Presslabel H6 – ULTRA VIOLET ETCHER
    The U.V. etcher makes it possible to prepare clichés independently and in a short time.

    Go to the Machine’s Page »

  • Leather Marker

    Leather Marker

    logo_LeatherMarker SF
    Unwinder for stamping using decorative ribbon (Foil).

    Go to the Machine’s Page »

  • Leather Spinner Hot Stamper

    Leather Spinner Hot Stamper

    logo_LeatherSpinner SF
    Unwinder for stamping using decorative ribbon (Foil).

    Go to the Machine’s Page »

  • Galvospinner

    Galvospinner

    logo telecamera5 Video camera “Label Genius Camera”
    The Label Genius Camera can be installed on our GALVOSPINNER and GALVOSPINNER 300 machines. These machines are equipped with a galvanometric laser cutting system, making them perfect for automatic die-cutting and marking single pieces of leather and imitation leather accessories and labels, giving a raster effect without having to make expensive dies or clichés.

    Go to the Machine’s Page »

  • Galvospinner 300

    Galvospinner 300

    logo telecamera5 Video camera “Label Genius Camera”
    The Label Genius Camera can be installed on our GALVOSPINNER and GALVOSPINNER 300 machines. These machines are equipped with a galvanometric laser cutting system, making them perfect for automatic die-cutting and marking single pieces of leather and imitation leather accessories and labels, giving a raster effect without having to make expensive dies or clichés.

    Go to the Machine’s Page »