Machine for transfer printing ribbons and tapes
Automatic machine ideal for ironing, heat-setting, transfer printing and also laminating ribbons with heat-adhesive film or heat-adhesive non-woven backing. The ironing of the ribbons remarkably improves the aspect and the surface of the ribbons, so increasing the productivity in successive processes with label cutting and folding machines. The feeding of the woven ribbons is by a conveyor belt that keeps the length unchanged. The ironing plate of 200 mm x 1200 mm is equipped with an automatic raising device when the machine stops. Speed up to 100 meters per minute.
RIBBON HEAT-SETTING AND IRONING
TRANSFER PRINTING (PT – OPTION)
RIBBON REWINDING AND MEASURING
MACHINE DESCRIPTIONTwo ribbon holders at in-feed.
Photocell to stop the machine at the end of the ribbon.
Ironing plate of 200 x 1200 mm with automatic raising device when the machine stops.
Safety switch protection device.
Two rewinders at out-feed.
PT_Option for transfer printing
Protection-paper roll holder and waste-paper rewinder is ideal for protecting the belt of the ironing surface from ink stains during transfer printing.
IP_Longitudinal folding device
For end fold, centre fold and Manhattan fold, workable dimensions:
Longitudinal END fold
Longitudinal CENTRE fold
Longitudinal MANHATTAN fold
V_Portable ultrasonic welder
Makes it possible to obtain very strong splicing between the end of one ribbon and the beginning of another.
|IRONING PLATE MEASUREMENTS:||200 x 1200 mm|
|RIBBON WIDTH:||MIN 3 mm / MAX 200 mm|
|MAX. SPEED:||Ironing with 2 ribbons: 100 m/min Transfer printing: 4 m/min Ribbon laminating: 8/14 m/min|
|ELECTRICS:||220/240 V 50/60 Hz|
|MAX ABSORBED POWER:||7,5 kW/h|
|DIMENSIONS:||250 x 80 x 80 h cm|