Omnilabel Logic 2.0
Machine for cutting and folding labels
Automatic machine to process woven and printed ribbons and tapes. The electronic feeding system with a step motor makes it possible to cut extremely long labels, up to 10 metres. Equipped with a touch screen to set the parameters of the machine settings and view working data using simple intuitive symbols.
IMAGE TARGETING (tolerance 0.5 mm) – in the presence of an irregular ribbon with long and short labels, the OMNILABEL LOGIC 2.0 machine always centres the image of the label between the folds.
Versatility: the folding blocks used by our cutting and folding machines are interchangeable and can be assembled on our entire range of cutting and folding machines.
Simplicity: simple and intuitive, with this fully automatic mechanical and electronic machine, even an unqualified operator can easily control different machines simultaneously.
Quality: the machine is able to obtain high speed production maintaining optimum quality of the finished label, which is indispensable to avoid costly disputes.
VIDEO CAMERA “OMNICAMERA” – OPTION: accessory for quality control of ribbons complete with video camera and software, for the recognition and automatic rejection of defective labels during ribbon processing.
CUTTING AND FEEDING SYSTEMS
FUSION CUTTING (STANDARD)
The fusion cutting system supplied can process ribbons up to 100 mm wide and ensures perfect welding of the edges which are resistant to tough wash cycles. Special management of the blade avoid the ribbon being damaged by the heat of the blade. The temperature is electronically controlled to remain constant during processing. Robust design and the use of top grade steel guarantee the operator can work with satisfaction, preventing costly downtime.
(FC115) FUSION CUTTING 115 mm WIDTH
This specially designed fusion cutting unit complete with a functional and customised guide can carry out the single cut of ribbons up to 115 mm wide.
(K) SCISSOR CUTTING
Designed for cutting ribbons up to 75 mm in width produced with any type of yarn even mixed cotton or Rayon. The temperature is adjustable and controlled electronically to remain constant during processing.
(K45°) SCISSOR CUTTING 45°
This specially modified version of the K – Scissor cutting option makes a 45º angle cut on ribbons.
(U50/U75) ULTRASONIC CUTTING
Ideal for cutting polyester and acetate, leaving the cut edge extremely soft to the touch. Two different ultrasonic cutting systems are available as options, one cuts up to 50 mm (U50) and the other up to 75 mm (U75), sealing the edges while cutting.
The machine is equipped with ribbon feeding by means of a step motor. It has the ability to cut ribbons with a minimum width of 6 mm, it can work to a pre-set length or by reading a reference mark by means of a “Hi-Tech” photocell to read the colour tone on tone.
FOLDING UNITS (OPTIONS)
8 label Omni M/M100
(M) OMNI FOLD UNIT 8-75 MM
This multifunctional folding unit gives 8 types of labels all from one single unit, processing ribbons varying in width from 8 to 75 mm. The change from one fold to another takes less than two minutes.
Stacker for Omni Fold Unit M for boxing labels starting from 10 mm in width.
(M100) OMNI FOLD UNIT 8-100 MM WIDE VERSION
This multifunctional folding unit in a wide version gives 8 types of labels all from one single unit, processing ribbons varying in width from 8 to 100 mm. The change from one fold to another takes less than two minutes. Supplied with a downward slide to stack up labels starting from 10 mm in width.
Types of fold obtainable with M and M100 (End fold, Centre Fold, Tag Fold, Manhattan open, Manhattan closed, Leaflet, Book Fold and only Cut):
M: A 8÷75 mm | B 32÷140 mm | C 4÷30 mm
M100: A 8÷100 mm | B 32÷180 mm | C 4÷30 mm
M: A 8÷75 mm | B 21÷65 mm
M100: A 8÷100 mm | B 21÷65 mm
M: A 8÷75 mm | B 32÷140 mm | C 4÷65 mm
M100: A 8÷100 mm | B 32÷180 mm | C 4÷65 mm
MANHATTAN FOLD CLOSED
M: A 8÷75 mm | B 30÷55 mm | C 4÷12 mm
M100: A 8÷100 mm | B 30÷55 mm | C 4÷12 mm
MANHATTAN FOLD OPEN
M: A 8÷75 mm | B 30÷65 mm | C 4÷12 mm
M100: A 8÷100 mm | B 30÷65 mm | C 4÷12 mm
M: A 8÷75 mm | B 30÷55 mm
M100: A 8÷100 mm | B 30÷55 mm
M: A 8÷75 mm | B 28÷130 mm | C 4÷65 mm
M100: A 8÷100 mm | B 28÷170 mm | C 4÷65 mm
M: A 8÷75 mm | B 22÷140 mm
M100: A 8÷100 mm | B 22÷180 mm
(E) END FOLD UNIT
(E3 20 mm) NARROW END FOLD BLOCK
(E3 16 mm) “MINI” NARROW END FOLD BLOCK
ADDITIONAL ACCESSORIES FOR E + E3
(E1) TAG FOLD ACCESSORY
Centre fold + book fold
*(C) CENTRE FOLD AND BOOK FOLD UNIT
*(C3) NARROW CENTRE FOLD AND BOOK FOLD UNIT
NARROW CENTRE FOLD
NARROW BOOK FOLD
ADDITIONAL ACCESSORIES FOR C+C3
*(C1) WELDING UNIT FOR CENTRE FOLD UNIT
*(C120) LONG CENTRE FOLD UNIT
*stacking from 10mm ribbon width.
(EC) BOOK COVER FOLD UNIT
MANHATTAN FOLD OPEN
MANHATTAN FOLD CLOSED
(T) MITRE FOLD UNIT
(I) LONGITUDINAL FOLDER
LONGITUDINAL END FOLD AND CUT
LONGITUDINAL CENTRE FOLD AND CUT “POCKET LABEL”
LONGITUDINAL MANHATTAN FOLD AND CUT
(I+E) “WILLY” 4 SIDED FOLD
|MAXIMUM SPEED:||200 pcs/min / 300 pcs/min for only cut with “U” option or with “U”+”I-folder” options|
|WORKABLE DIMENSIONS:||width 6 ÷ 95 mm|
|length 6 ÷ 10.000 mm|
|SAFETY:||in compliance with CE norms|
|ELECTRICS:||220/240 V, 50/60 Hz|
|MAX ABSORBED POWER:||1.5 kW|
|NOISE LEVEL:||< 70 dB|
|AIR:||10 L/min | 4 bar|
|DIMENSIONS:||143 x 95 x 174 h cm|